Detailed Photos
Introduction
1) Reactor is the main chemical reaction of the typical production equipment, which is widely used in resins, adhesives, paint, cosmetics, pharmaceutical and other chemical production.
2) To break down or combined the materials through mixing, filling and cooling, to promote the reaction of polymerization.
3) The reactor consists of body, gears, mixing devices, heating devices, cooling devices, seal composition.
4) Corresponding auxiliary equipment: distillation column, condenser, water separator, collecting cans, filters ect.
Product Description
How to use tire self-rehydration:
1)Unscrew the tire valve core and drain the air inside the tire.
2) Before the glue is injected, it must be fully shaken evenly, then tear off all the film of the bottle mouth and bottle cap, put the hose on the bottle cap, the other end of the hose on the tire valve, squeeze the bottle by hand Inject it into the tire in a physical way.
3) After the glue is squeezed into the tire, remove the residue on the valve nozzle, screw on the valve core, and then use an air pump to inflate the tire to the specified air pressure, and then rotate the tire to disperse the glue.
The tire repair principle of tire self-rehydration
1)Inject the tire self-refilling fluid into the tire. When the tire rotates, the glue is uniformly attached to the inner wall of the tire in a liquid form under the action of centrifugal force. Once the tire is punctured, the air pressure in the tire will prompt the glue to quickly flow to the puncture and form Protective film, repair the breach.
2)In the tire tread area inside the tire rubber jacket, the product sealing surface area is thorny. When the tire punctures, the escaping air brings the sealant to the puncture site. The drained part of the sealant and the accumulation and interweaving of fibers and adhesives form a flexible insert. This will allow the product to instantly seal any punctures that may occur. Self-healing sealant prevents the apartment for up to two years. When it is used as a sealant to handle tire rotation, centrifugal force pushes the rubber tread area to form a layer of protection, and repairs existing thorns when perforations occur.
about us