| Customization: | Available |
|---|---|
| Additional Capabilities: | Milling |
| After-sales Service: | Network Support |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1) Reactor is the main chemical reaction of the typical production equipment, which is widely used in resins, adhesives, paint, cosmetics, pharmaceutical and other chemical production.
2) To break down or combined the materials through mixing, filling and cooling, to promote the reaction of polymerization.
3) The reactor consists of body, gears, mixing devices, heating devices, cooling devices, seal composition.
4) Corresponding auxiliary equipment: distillation column, condenser, water separator, collecting cans, filters ect.
In order to overcome the problem of tires of various vehicles being punctured by iron nails and other sharp objects, tire self-rehydration is the most ideal accessory. If the tires are pre-added with a proper amount of glue, when the tires are punctured, the special substances in the glue can be used Quickly and effectively block the breach and solidify into a film to fill the breach. At the same time, the tire will not leak if it is punctured in the future, there is no need to repair the tire, and it can extend the service life of the tire. The tire self-refilling is suitable for all kinds of tires, which is very convenient.
How to use tire self-rehydration:
1.)Unscrew the tire valve core and drain the air inside the tire.
2) Before the glue is injected, it must be fully shaken evenly, then tear off all the film of the bottle mouth and bottle cap, put the hose on the bottle cap, the other end of the hose on the tire valve, squeeze the bottle by hand Inject it into the tire in a physical way.
3) After the glue is squeezed into the tire, remove the residue on the valve nozzle, screw on the valve core, and then use an air pump to inflate the tire to the specified air pressure, and then rotate the tire to disperse the glue.
The tire repair principle of tire self-rehydration
1)Inject the tire self-refilling fluid into the tire. When the tire rotates, the glue is uniformly attached to the inner wall of the tire in a liquid form under the action of centrifugal force. Once the tire is punctured, the air pressure in the tire will prompt the glue to quickly flow to the puncture and form Protective film, repair the breach.
2)In the tire tread area inside the tire rubber jacket, the product sealing surface area is thorny. When the tire punctures, the escaping air brings the sealant to the puncture site. The drained part of the sealant and the accumulation and interweaving of fibers and adhesives form a flexible insert. This will allow the product to instantly seal any punctures that may occur. Self-healing sealant prevents the apartment for up to two years. When it is used as a sealant to handle tire rotation, centrifugal force pushes the rubber tread area to form a layer of protection, and repairs existing thorns when perforations occur.
| model | nominal capaci | actual capci | heating power | jacket capaci | inner pot size | jacket size | hole center | volume |
| 50L | 50 | 78 | 2*4 | 96 | 400 | 600 | 828 | 10 |
| 100L | 100 | 127 | 2*6 | 127 | 500 | 700 | 928 | 15 |
| 300L | 300 | 327 | 4*6 | 218 | 800 | 1000 | 1148 | 20 |
| 500L | 500 | 509 | 4*9 | 269 | 900 | 1100 | 1252 | 25 |
| 1000L | 1000 | 1017 | 4*12 | 400 | 1200 | 1400 | 1588 | 40 |
| 2000L | 2000 | 2154 | 4*15 | 850 | 1400 | 1600 | 1840 | 80 |
| 3000L | 3000 | 3201 | 5*15 | 1015 | 1600 | 1750 | 2040 | 100 |
| 4000L | 4000 | 4020 | 5*15 | 1226 | 1600 | 1750 | 2070 | 120 |
| 5000L | 5000 | 5170 | 5*18 | 1400 | 1800 | 2000 | 2320 | 140 |
Q : Can you send the formula for the products we want to make ?
A : Our machines can be used for many kinds of product making ,such as Resin , Paint, Adhesive , Cosmetic , Food , Chemicals . There are many kinds of these products , so it's impossible for us to know all the formulas and technologies . We can assist you to find the raw material list you need , and after you place order with us , we can help you to find formula and technology , there will engineers to teach you how to make the product , and the cost will be on your account.
Q : Do you have machines in stock ?
A : Yes , but just the small-scale machines Machines are different with other products , most of the large-scale machines are designed according to our customers 'requirements different customers have different production requirements , so the technical parameter is different for most machines On the other hands , most of the our machines will cover a large area , so once the machines are finished , we will effect shipment after QC .
Q : Can you send the detailed drawings of the machine to us before we place order ?
A : We can send you a draft drawing of the machines , and after you place order and pay the deposit , our engineer will design the send you the detailed drawings . Once you confirm without questions , we will put it into production.
Q : Why does it take at least 20 days to finish the machine ?
A : Once receipt the deposit from you , we will design the drawings and make out the list of the materials and accessories for the production . Once the drawings are finished , our workers will start the production , from welding , polishing , assembling debugging , detection and so on . After finish , they need time to check the machines , if found any possible defect parts , they will return to the production until every part is 100% approved.
Q : Can we pay the balance after we receive the machines and test without problem.
A : It's unnessary to worry about the quality of our machines , we are confident in that . After the machine is finished . we can install and test the machine for you ( if you can not come to our factory ,we can record a video and send to you ) . Only after you check without problems , we will effect shipment .
){kind=link}