Kitchen Bathroom Waterproof Silicone Sealan Ms Structural Adhesive Dispersion Mixing Dual Shaft Mixer

• Customization: Available
• Additional Capabilities: Milling
• After-sales Service: Network Support
• Model NO.: NHZ
• Application: Liquid, Liquid with Suspended Solids, Powder, Viscous Fluid
• Application Area: Chemical
• Condition: New
• Stirring Type: Spiral
• Working: High Speed Mixer
• Material: Customizable
• Power: Customizable
• Heating Way: Customizable
• Warranty Period: 1 Year
• Mixer Type: Powder Mixer
• Layout Type: Verticle
• Mixing Drum Shape: Drum
• Operating Type: Cycle Operating
• Warranty: 1 Year
• Transport Package: Customizable
• Specification: 50L to 5000L
• Trademark: JCT
• Origin: Foshan
• HS Code: 8474390000
• Production Capacity: 5000picecs/Year
• Package Size: 150.00cm * 95.00cm * 246.00cm
• Package Gross Weight: 300.000kg

Product Description

 

 

Detailed Photos

 

Product Description

1)Base material dispersing mixer/Vacuum kneader,

2)High viscosity pump 

3)Base storage tank,

4)heating system(according to actual requirements)

5)Vacuum system,

6)Three roller grinding machine(according to actual requirements)

7)multifunctional-dispersing machine

8)Hydraulic discharging machine,

9)Cooling system,

10)Sealant filling machine( plastic bottle filling machine,film filling machine)

11)Raw material storage tank

12)Oven,

13)Batching system,
 

model	feeding voluma	planetary motor	high-speed motor	Revolution speed	Rotation speed	High speed dispersion speed	Remarks
DLH-6L	3.6	1.5	1.5	27	43	0~1000
DLH-20L	12	3	3	27	43	0~1000
DLH-60L	36	4	4	27	43	0~1000
DLH-100L	60	7.5	5.5	27	43	0~1000
DLH-200L	120	15	11	27	43	0~1000
DLH-350L	210	18.5	18.5	27	43	0~1000
DLH-600L	360	22	22	27	43	0~1000
DLH-1000L	600	37	30	23	43	0~1000
DLH-1500L	900	45	45	23	43	0~1000
DLH-2000L	1200	55	45	23	43	0~1000

 

Production process

1)Pulp part
The solvent through the liquid metering device is added to the liquid material groove , by Vacuum suction to emulsifying kettle , start low speed anchor mixer , the powder material is sucked into the vacuum emulsifying tank for continuous stirred 10 minutes , then turn on the two sets of vertical high shear emulsifying 10 minutes , finally use horizontal emulsion machine , continuous cycle 30 minutes , finished slurry . A high shear inside the tank and an emulsion pump outside the tank are also used ,Ensure further refinement of materials , and greatly shorten the operation time 
2)Paint part
  By vacuum , resin , film-forming agent from the liquid tank into the low-speed stirred tank  the bag filter is sucked into the low-speed mixer , the emulsion or solvent ,additives , slurry mixing , then adding additives ( thickener ) , blending paint .
3 ) Filter packing
After a good tune paint , vacuum defoaming after 5 minutes , stirring was stopped by a bag coating to semi-automatic filling machine for packaging , When the coating material using a two bag filters , can be switched with each use , does not affect the filling speed