| Customization: | Available |
|---|---|
| Additional Capabilities: | Milling |
| After-sales Service: | Network Support |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1) Reactor is the main chemical reaction of the typical production equipment, which is widely used in resins, adhesives, paint, cosmetics, pharmaceutical and other chemical production.
2) To break down or combined the materials through mixing, filling and cooling, to promote the reaction of polymerization.
3) The reactor consists of body, gears, mixing devices, heating devices, cooling devices, seal composition.
4) Corresponding auxiliary equipment: distillation column, condenser, water separator, collecting cans, filters ect.
In order to overcome the problem of tires of various vehicles being punctured by iron nails and other sharp objects, tire self-rehydration is the most ideal accessory. If the tires are pre-added with a proper amount of glue, when the tires are punctured, the special substances in the glue can be used Quickly and effectively block the breach and solidify into a film to fill the breach. At the same time, the tire will not leak if it is punctured in the future, there is no need to repair the tire, and it can extend the service life of the tire. The tire self-refilling is suitable for all kinds of tires, which is very convenient.
How to use tire self-rehydration:
1.)Unscrew the tire valve core and drain the air inside the tire.
2) Before the glue is injected, it must be fully shaken evenly, then tear off all the film of the bottle mouth and bottle cap, put the hose on the bottle cap, the other end of the hose on the tire valve, squeeze the bottle by hand Inject it into the tire in a physical way.
3) After the glue is squeezed into the tire, remove the residue on the valve nozzle, screw on the valve core, and then use an air pump to inflate the tire to the specified air pressure, and then rotate the tire to disperse the glue.
The tire repair principle of tire self-rehydration
1)Inject the tire self-refilling fluid into the tire. When the tire rotates, the glue is uniformly attached to the inner wall of the tire in a liquid form under the action of centrifugal force. Once the tire is punctured, the air pressure in the tire will prompt the glue to quickly flow to the puncture and form Protective film, repair the breach.
2)In the tire tread area inside the tire rubber jacket, the product sealing surface area is thorny. When the tire punctures, the escaping air brings the sealant to the puncture site. The drained part of the sealant and the accumulation and interweaving of fibers and adhesives form a flexible insert. This will allow the product to instantly seal any punctures that may occur. Self-healing sealant prevents the apartment for up to two years. When it is used as a sealant to handle tire rotation, centrifugal force pushes the rubber tread area to form a layer of protection, and repairs existing thorns when perforations occur.
){kind=link}