STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
| Customization: | Available |
|---|---|
| Additional Capabilities: | Drying, Milling |
| After-sales Service: | Network Support |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1)Base material dispersing mixer
2)High viscosity pump
3)Base storage tank,
4)heating system(according to actual requirements)
5)Vacuum system,
6)Three roller grinding machine(according to actual requirements)
7)multifunctional-dispersing machine
8)Hydraulic discharging machine,
9)Cooling system,
10)Sealant filling machine( plastic bottle filling machine,film filling machine)
11)Raw material storage tank
12)Oven,
13)Batching system,
| model | feeding voluma | planetary motor | Revolution speed | Rotation speed | Vacuum | Remarks |
| L | KW | rpm | rpm | mpa | for reference only | |
| XJB-2L | 1.2 | 0.75 | 0-28 | 0-100 | -0.096 | |
| XJB-5L | 3 | 1.5 | 0-28 | 0-100 | -0.096 | |
| XJB-20L | 12 | 4 | 0-28 | 0-100 | -0.096 | |
| XJB-50L | 30 | 5.5 | 0-28 | 0-100 | -0.096 | |
| XJB-100L | 60 | 11 | 0-28 | 0-100 | -0.096 | |
| XJB-200L | 120 | 15 | 0-22 | 0-80 | -0.096 | |
| XJB-300L | 180 | 18.5 | 0-22 | 0-80 | -0.096 | |
| XJB-500L | 300 | 30 | 0-22 | 0-80 | -0.096 | |
| XJB-1000 | 600 | 45 | 0-22 | 0-80 | -0.096 | |
| XJB-1500 | 900 | 55 | 0-22 | 0-80 | -0.096 | |
| XJB-2000 | 1200 | 75 | 0-22 | 0-80 | -0.096 |
1)Pulp part
The solvent through the liquid metering device is added to the liquid material groove , by Vacuum suction to emulsifying kettle , start low speed anchor mixer , the powder material is sucked into the vacuum emulsifying tank for continuous stirred 10 minutes , then turn on the two sets of vertical high shear emulsifying 10 minutes , finally use horizontal emulsion machine , continuous cycle 30 minutes , finished slurry . A high shear inside the tank and an emulsion pump outside the tank are also used ,Ensure further refinement of materials , and greatly shorten the operation time
2)Paint part
By vacuum , resin , film-forming agent from the liquid tank into the low-speed stirred tank the bag filter is sucked into the low-speed mixer , the emulsion or solvent ,additives , slurry mixing , then adding additives ( thickener ) , blending paint .
3 ) Filter packing
After a good tune paint , vacuum defoaming after 5 minutes , stirring was stopped by a bag coating to semi-automatic filling machine for packaging , When the coating material using a two bag filters , can be switched with each use , does not affect the filling speed
){kind=link}